Follow The Lee Company
This extended performance, in-line, high speed dispensing valve performs consistently under high pressure and high temperature conditions. Featuring a welded stainless steel construction with ports sized for standard 1/16” ID ferruled compression fittings, this robust 6.4 mm axial flow valve offers rapid response times and can generate droplets operating up to 500 Hz. Its high speed operation enables accurate flow metering, acting as a replacement for some pressure regulators. Its ability to operate under high temperatures enables precision dispensing of viscous fluids and enables sterilization. Typical applications include electrolyte and wax dispensing, electron microscopes, precision propulsion systems, and cryogenic surgery devices. Each valve is customizable and 100% tested to ensure performance.
| Characteristic | Specification |
|---|---|
| Operating Pressure* | 0 - 800 psig |
| Recommended Filtration | 17 Microns or Finer |
| Dispensing Frequency** | Up To 500 Hz |
| Internal Volume | 62 uL |
| Min Spike Duration*** | 1 ms at 10 psig 3.8 ms at Max Rated Pressure |
| Operating Temperature**** | Up to 275°F (135°C) |
| Weight | 4.7 grams |
| Component | Material |
|---|---|
| Ports, Housing, and Spring | 316 Stainless Steel |
| Plunger, Plunger Stop | FeCr Alloy |
| Seal | EPDM or FFKM FKM Upon Request |
This table below contains the part numbers and technical specifications for this product. If you have specific questions, need a quote, or would like to request a handbook or drawing, click the red request button in the column on the far right.
| PART NUMBER | DESCRIPTION |
|---|---|
| IECX0501500A | Spike and Hold Driver, Adjustable from 1 to 100 ms |
| IHWX0248010A | Lead Wire Assembly, 8" (20.3 cm) With Flying Leads Ready for Termination or Soldering |
| IHWX0248120A | Lead Wire Assembly, 24" (61 cm) With Flying Leads Ready for Termination or Soldering. |
From plugs to solenoid valves, there’s a vast array of products that The Lee Company can offer. If you’d like to discuss the best solution for your specific application or to learn more about our capabilities, use-cases, or quality standards, contact your local Lee sales engineer.
Your download has started.
We’re always ready to be your engineering partner. Fill out this form below so we can provide the solution you need.
We have received your inquiry and a member of our team will be in contact shortly to provide more information. Thank you for contacting The Lee Company!
The Lee Company has developed the Lohm Laws for defining and measuring resistance to fluid flow. The Lohm is defined such that 1 Lohm will flow 100 GPM of water with a pressure drop of 25 psi at a temperature of 80°F.
Always verify flow calculations by experiment.
*There are many parameters to consider when determining V-Factor. Click here for more information.
