Follow The Lee Company
This Quick Installation Plug is a pre-assembled plug set that combines ease of handling and installation with the proven reliability and performance of Lee expansion plugs. Lee plugs continue to be the simplest, most successful method for sealing cross-drilled holes. Upon installation of the pin, the lands and grooves form independent seals and retaining rings. Sizes range from 0.093 to 0.187 inches.
| | Class 1 | Class 2 | Class 3 |
|---|---|---|---|
| Proof Pressure (psi x 1000) | 6 | 8 | 10 |
| PART | MATERIAL | SPECIFICATION | FINISH |
|---|---|---|---|
| Pin | 2024-T4 Aluminum | SAE AMS-QQ-A-225/6 and AMS 4119 | Alodine Yellow per MIL-DTL-5541 & Wax |
| Plug | 2024-T4 Aluminum | SAE AMS-QQ-A-225/6 and AMS 4120 | Anodize Green per MIL-A-8625 Type IIB |
For dimensions, please refer to the Part Numbers & Specifications tab.
This table below contains the part numbers and technical specifications for this product. If you have specific questions, need a quote, or would like to request a handbook or drawing, click the red request button in the column on the far right.
| Part Number | Description |
|---|---|
| CUTA0930303A | Seating Tool |
| CUTA0930203A | Installation Tool Set |
| CUTA0930103B | Extraction Tool Set |
| CUTA0931103A | Gauge |
| PLGA1030010A | Oversize Lee Plug |
From plugs to solenoid valves, there’s a vast array of products that The Lee Company can offer. If you’d like to discuss the best solution for your specific application or to learn more about our capabilities, use-cases, or quality standards, contact your local Lee sales engineer.
Your download has started.
We’re always ready to be your engineering partner. Fill out this form below so we can provide the solution you need.
We have received your inquiry and a member of our team will be in contact shortly to provide more information. Thank you for contacting The Lee Company!
The Lee Company has developed the Lohm Laws for defining and measuring resistance to fluid flow. The Lohm is defined such that 1 Lohm will flow 100 GPM of water with a pressure drop of 25 psi at a temperature of 80°F.
Always verify flow calculations by experiment.
*There are many parameters to consider when determining V-Factor. Click here for more information.
