Close Menu

Product Finder

Lohms represent resistance in a fluid system.
55 Products Found
2.5 mm Press-in Safety Screen Filter
This stainless steel, woven wire mesh, safety screen filter is designed for direct installation into plastic housings or fittings.
Key Product Facts
  • Mounting Configuration: Press-In - Into Plastic
  • Lohm Rate: As low as 850 Lohms
  • Micron Rating: 4 to 40 microns
  • Part Diameter: 2.54 mm
  • Screenable Passageway Diameter: 2.36 mm
View Product
5.5 mm Press-in Safety Screen Filter
This stainless steel, woven wire mesh, safety screen filter is designed for direct installation into plastic housings or fittings.
Key Product Facts
  • Mounting Configuration: Press-In - Into Plastic
  • Lohm Rate: As low as 170 Lohms
  • Micron Rating: 40 to 170 microns
  • Part Diameter: 5.46 mm
  • Screenable Passageway Diameter: 5.36 mm
View Product
8 mm Press-In Safety Screen Filter
This stainless steel, woven wire mesh, safety screen filter is designed for direct installation into plastic housings or fittings.
Key Product Facts
  • Mounting Configuration: Press-In - Into Plastic
  • Lohm Rate: As low as 70 Lohms
  • Micron Rating: 40 to 170 microns
  • Part Diameter: 7.92 mm
  • Screenable Passageway Diameter: 7.82 mm
View Product
8 mm Cartridge Safety Screen Filter
Our highest pressure rated woven wire mesh safety screen filter design. It's designed to be placed in a flat bottom hole and retained by a secondary means.
Key Product Facts
  • Mounting Configuration: Cartridge - Customer Retained
  • Lohm Rate: As low as 70 Lohms
  • Micron Rating: 40 to 170 microns
  • Part Diameter: 7.93 mm
  • Screenable Passageway Diameter: As large as 6.03 mm
View Product
5.5 mm Cartridge Safety Screen Filter
Our highest pressure rated woven wire mesh safety screen filter design. It's designed to be placed in a flat bottom hole and retained by a secondary means.
Key Product Facts
  • Mounting Configuration: Cartridge - Customer Retained
  • Lohm Rate: As low as 165 Lohms
  • Micron Rating: 40 to 170 microns
  • Part Diameter: 5.43 mm
  • Screenable Passageway Diameter: As large as 3.84 mm
View Product
10 mm Cartridge Safety Screen Filter
Our highest pressure rated woven wire mesh safety screen filter design. It's designed to be placed in a flat bottom hole and retained by a secondary means.
Key Product Facts
  • Mounting Configuration: Cartridge - Customer Retained
  • Lohm Rate: As low as 35 Lohms
  • Micron Rating: 40 to 300 microns
  • Part Diameter: 9.93 mm
  • Screenable Passageway Diameter: As large as 7.56 mm
View Product
HI-BAR® Safety Screen, 380 Flange Mount, PEEK
This last chance filter is laser drilled from a single piece of PEEK and comes with a flange mount.
Key Product Facts
  • Mounting Configuration: Flange Mount
  • Lohm Rate: 30 to 45 Lohms
  • Micron Rating: 75 to 500 microns
  • Part Diameter: 0.380 inches
  • Screenable Passageway Diameter: 0.31 inches
View Product
Etched Safety Screen Filter, 375 Boss Mount, 304L
This etched last chance filter is constructed of 304L stainless steel. It is available in a threaded mounting configuration and a range of standard hole size options.
Key Product Facts
  • Mounting Configuration: Boss Mount
  • Lohm Rate: 40 Lohms
  • Micron Rating: 75 to 500 microns
  • Part Diameter: 0.375 inches
  • Screenable Passageway Diameter: 0.281 inches
View Product
Series 20 Safety Screen Filter, 130 Flange Mount, 316L
This wire mesh last chance filter is constructed of 316L stainless steel and features a hole size of 20 μm.
Key Product Facts
  • Mounting Configuration: Flange Mount
  • Lohm Rate: 450 Lohms
  • Micron Rating: 20 microns
  • Part Diameter: 0.130 inches
  • Screenable Passageway Diameter: 0.126 inches
View Product
Series 10 and 20 Safety Screen Filters, 255 Flange Mount, 316L
This wire mesh last chance filter is constructed of 316L stainless steel and offers hole sizes of 10 or 20 μm.
Key Product Facts
  • Mounting Configuration: Flange Mount
  • Lohm Rate: 120 or 180 Lohms
  • Micron Rating: 10 or 20 microns
  • Part Diameter: 0.255 inches
  • Screenable Passageway Diameter: 0.223 inches
View Product
10 mm Insert Safety Screen Filter
This stainless steel, woven wire mesh, safety screen filter has a locking end designed for direct installation into metal housings.
Key Product Facts
  • Mounting Configuration: Insert - Into Metal
  • Lohm Rate: As low as 40 Lohms
  • Micron Rating: 40 to 170 microns
  • Part Diameter: 10.00 mm
  • Screenable Passageway Diameter: 9.0 mm
View Product
12 mm Insert Safety Screen Filter
This stainless steel, woven wire mesh, safety screen filter has a locking end designed for direct installation into metal housings.
Key Product Facts
  • Mounting Configuration: Insert - Into Metal
  • Lohm Rate: As low as 30 Lohms
  • Micron Rating: 40 to 170 microns
  • Part Diameter: 12.00 mm
  • Screenable Passageway Diameter: 11.0 mm
View Product
12 mm Cartridge Safety Screen Filter
Our highest pressure rated woven wire mesh safety screen filter design. It's designed to be placed in a flat bottom hole and retained by a secondary means.
Key Product Facts
  • Mounting Configuration: Cartridge - Customer Retained
  • Lohm Rate: As low as 25 Lohms
  • Micron Rating: 40 to 300 microns
  • Part Diameter: 11.84 mm
  • Screenable Passageway Diameter: As large as 9.46 mm
View Product
LO-LOHM HI-BAR® Safety Screen Filter, 670 Flange Mount
This laser drilled last chance filter is optimized for flow to produce the lowest pressure drops for the package size.
Key Product Facts
  • Mounting Configuration: Flange Mount
  • Lohm Rate: 6 or 10 Lohms
  • Micron Rating: 50 to 500 microns
  • Part Diameter: 0.670 inches
  • Screenable Passageway Diameter: 0.52 inches
View Product
LO-LOHM HI-BAR® Safety Screen Filter, 495 Flange Mount
This laser drilled last chance filter is optimized for flow to produce the lowest pressure drops for the package size.
Key Product Facts
  • Mounting Configuration: Flange Mount
  • Lohm Rate: 10 to 18 Lohms
  • Micron Rating: 50 to 500 microns
  • Part Diameter: 0.495 inches
  • Screenable Passageway Diameter: 0.40 inches
View Product
LO-LOHM HI-BAR® Safety Screen Filter, 380 Flange Mount
This laser drilled last chance filter is optimized for flow to produce the lowest pressure drops for the package size.
Key Product Facts
  • Mounting Configuration: Flange Mount
  • Lohm Rate: 15 to 25 Lohms
  • Micron Rating: 50 to 500 microns
  • Part Diameter: 0.380 inches
  • Screenable Passageway Diameter: 0.31 inches
View Product
LO-LOHM HI-BAR® Safety Screen Filter, 330 Flange Mount
This laser drilled last chance filter is optimized for flow to produce the lowest pressure drops for the package size.
Key Product Facts
  • Mounting Configuration: Flange Mount
  • Lohm Rate: 25 to 35 Lohms
  • Micron Rating: 50 to 500 microns
  • Part Diameter: 0.330 inches
  • Screenable Passageway Diameter: 0.26 inches
View Product
LO-LOHM HI-BAR® Safety Screen Filter, 230 Flange Mount
This laser drilled last chance filter is optimized for flow to produce the lowest pressure drops for the package size.
Key Product Facts
  • Mounting Configuration: Flange Mount
  • Lohm Rate: 50 to 70 Lohms
  • Micron Rating: 50 to 500 microns
  • Part Diameter: 0.230 inches
  • Screenable Passageway Diameter: 0.19 inches
View Product
LO-LOHM HI-BAR® Safety Screen Filter, 130 Flange Mount
This laser drilled last chance filter is optimized for flow to produce the lowest pressure drops for the package size.
Key Product Facts
  • Mounting Configuration: Flange Mount
  • Lohm Rate: 140 to 180 Lohms
  • Micron Rating: 50 to 500 microns
  • Part Diameter: 0.130 inches
  • Screenable Passageway Diameter: 0.125 inches
View Product
HI-BAR® Safety Screen Filter, 230 Flange Mount, PEEK
This last chance filter is laser drilled from a single piece of PEEK and comes with a flange mount.
Key Product Facts
  • Mounting Configuration: Flange Mount
  • Lohm Rate: 90 to 120 Lohms
  • Micron Rating: 75 to 500 microns
  • Part Diameter: 0.230 inches
  • Screenable Passageway Diameter: 0.19 inches
View Product
HI-BAR® Safety Screen Filter, 130 Flange Mount, PEEK
This last chance filter is laser drilled from a single piece of PEEK and comes with a flange mount.
Key Product Facts
  • Mounting Configuration: Flange Mount
  • Lohm Rate: 200 to 350 Lohms
  • Micron Rating: 75 to 500 microns
  • Part Diameter: 0.130 inches
  • Screenable Passageway Diameter: 0.125 inches
View Product
HI-BAR® Safety Screen, 330 Flange Mount, PEEK
This last chance filter is laser drilled from a single piece of PEEK and comes with a flange mount.
Key Product Facts
  • Mounting Configuration: Flange Mount
  • Lohm Rate: 40 to 55 Lohms
  • Micron Rating: 75 to 500 microns
  • Part Diameter: 0.330 inches
  • Screenable Passageway Diameter: 0.26 inches
View Product
HI-BAR® Safety Screen, 495 Flange Mount, PEEK
This last chance filter is laser drilled from a single piece of PEEK and comes with a flange mount.
Key Product Facts
  • Mounting Configuration: Flange Mount
  • Lohm Rate: 20 or 25 Lohms
  • Micron Rating: 75 to 500 microns
  • Part Diameter: 0.495 inches
  • Screenable Passageway Diameter: 0.40 inches
View Product
HI-BAR® Safety Screen Filter, 670 Flange Mount, PEEK
This last chance filter is laser drilled from a single piece of PEEK and comes with a flange mount.
Key Product Facts
  • Mounting Configuration: Flange Mount
  • Lohm Rate: 10 or 15 Lohms
  • Micron Rating: 75 to 500 microns
  • Part Diameter: 0.670 inches
  • Screenable Passageway Diameter: 0.52 inches
View Product
Etched Safety Screen Filter, 10 mm Boss Mount, 304L
This etched last chance filter is constructed of 304L stainless steel. It is available in a threaded mounting configuration and a range of standard hole size options.
Key Product Facts
  • Mounting Configuration: Boss Mount
  • Lohm Rate: 20 or 25 Lohms
  • Micron Rating: 75 to 500 microns
  • Part Diameter: 10 mm
  • Screenable Passageway Diameter: 8 mm
View Product
Etched Safety Screen Filter, 750 Boss Mount, 304L
This etched last chance filter is constructed of 304L stainless steel. It is available in a threaded mounting configuration and a range of standard hole size options.
Key Product Facts
  • Mounting Configuration: Boss Mount
  • Lohm Rate: 8 Lohms
  • Micron Rating: 75 to 500 microns
  • Part Diameter: 0.750 inches
  • Screenable Passageway Diameter: 0.53 inches
View Product
Etched Safety Screen Filter, 562 Boss Mount, 304L
This etched last chance filter is constructed of 304L stainless steel. It is available in a threaded mounting configuration and a range of standard hole size options.
Key Product Facts
  • Mounting Configuration: Boss Mount
  • Lohm Rate: 16 Lohms
  • Micron Rating: 75 to 500 microns
  • Part Diameter: 0.562 inches
  • Screenable Passageway Diameter: 0.39 inches
View Product
Etched Safety Screen Filter, 500 Boss Mount, 304L
This etched last chance filter is constructed of 304L stainless steel. It is available in a threaded mounting configuration and a range of standard hole size options.
Key Product Facts
  • Mounting Configuration: Boss Mount
  • Lohm Rate: 18 Lohms
  • Micron Rating: 75 to 500 microns
  • Part Diameter: 0.500 inches
  • Screenable Passageway Diameter: 0.375 inches
View Product
Etched Safety Screen Filter, 437 Boss Mount, 304L
This etched last chance filter is constructed of 304L stainless steel. It is available in a threaded mounting configuration and a range of standard hole size options.
Key Product Facts
  • Mounting Configuration: Boss Mount
  • Lohm Rate: 20 or 25 Lohms
  • Micron Rating: 75 to 500 microns
  • Part Diameter: 0.437 inches
  • Screenable Passageway Diameter: 0.316 inches
View Product
Etched Safety Screen Filter, 312 Boss Mount, 304L
This etched last chance filter is constructed of 304L stainless steel. It is available in a threaded mounting configuration and a range of standard hole size options.
Key Product Facts
  • Mounting Configuration: Boss Mount
  • Lohm Rate: 85 Lohms
  • Micron Rating: 75 to 500 microns
  • Part Diameter: 0.312 inches
  • Screenable Passageway Diameter: 0.187 inches
View Product
Series 10 and 20 Safety Screens, 656 Flange Mount, 316L
This wire mesh last chance filter is constructed of 316L stainless steel and offers hole sizes of 10 or 20 μm.
Key Product Facts
  • Mounting Configuration: Flange Mount
  • Lohm Rate: 13 or 25 Lohms
  • Micron Rating: 10 or 20 microns
  • Part Diameter: 0.656 inches
  • Screenable Passageway Diameter: 0.595 inches
View Product
Series 10 and 20 Safety Screen Filters, 500 Flange Mount, 316L
This wire mesh last chance filter is constructed of 316L stainless steel and offers hole sizes of 10 or 20 μm.
Key Product Facts
  • Mounting Configuration: Flange Mount
  • Lohm Rate: 30 or 50 Lohms
  • Micron Rating: 10 or 20 microns
  • Part Diameter: 0.500 inches
  • Screenable Passageway Diameter: 0.445 inches
View Product
Series 10 and 20 Safety Screen Filters, 375 Flange Mount, 316L
This wire mesh last chance filter is constructed of 316L stainless steel and offers hole sizes of 10 or 20 μm.
Key Product Facts
  • Mounting Configuration: Flange Mount
  • Lohm Rate: 50 or 95 Lohms
  • Micron Rating: 10 or 20 microns
  • Part Diameter: 0.375 inches
  • Screenable Passageway Diameter: 0.333 inches
View Product
Series 10 and 20 Safety Screen Filters, 312 Flange Mount, 316L
This wire mesh last chance filter is constructed of 316L stainless steel and offers hole sizes of 10 or 20 μm.
Key Product Facts
  • Mounting Configuration: Flange Mount
  • Lohm Rate: 80 or 100 Lohms
  • Micron Rating: 10 or 20 microns
  • Part Diameter: 0.312 inches
  • Screenable Passageway Diameter: 0.312 inches
View Product
Series 10 and 20 Safety Screen Filters, 230 Flange Mount, 316L
This wire mesh last chance filter is constructed of 316L stainless steel and offers hole sizes of 10 or 20 μm.
Key Product Facts
  • Mounting Configuration: Flange Mount
  • Lohm Rate: 200 or 300 Lohms
  • Micron Rating: 10 or 20 microns
  • Part Diameter: 0.230 inches
  • Screenable Passageway Diameter: 0.195 inches
View Product
Series 20 Safety Screen Filter, 170 Flange Mount, 316L
This wire mesh last chance filter is constructed of 316L stainless steel and features a hole size of 20 μm.
Key Product Facts
  • Mounting Configuration: Flange Mount
  • Lohm Rate: 450 Lohms
  • Micron Rating: 20 microns
  • Part Diameter: 0.170 inches
  • Screenable Passageway Diameter: 0.14 inches
View Product
1301 Flange Mount Safety Screen Filter
This drilled last chance filter is constructed of 304L stainless steel. It is capable of handling burst and collapse pressures up to 3000 psid.
Key Product Facts
  • Mounting Configuration: Flange Mount
  • Lohm Rate: 250 Lohms
  • Micron Rating: 380 or 510 microns
  • Part Diameter: 0.130 inches
  • Screenable Passageway Diameter: 0.126 inches
View Product
Etched Safety Screen Filter, 656 Flange Mount, 17-7PH
This etched last chance filter is constructed of 17-7 PH stainless steel and designed with a flange mounting configuration. It is available in a range of hole size options.
Key Product Facts
  • Mounting Configuration: Flange Mount
  • Lohm Rate: 8 Lohms
  • Micron Rating: 100 to 500 microns
  • Part Diameter: 0.656 inches
  • Screenable Passageway Diameter: 0.540 inches
View Product
Etched Safety Screen Filter, 656 Flange Mount, 304L
This etched last chance filter is constructed of 304L stainless steel and designed with a flange mounting configuration. It is available in a range of hole size options.
Key Product Facts
  • Mounting Configuration: Flange Mount
  • Lohm Rate: 8 Lohms
  • Micron Rating: 75 to 500 microns
  • Part Diameter: 0.656 inches
  • Screenable Passageway Diameter: 0.540 inches
View Product
Etched Safety Screen Filter, 500 Flange Mount, 17-7PH
This etched last chance filter is constructed of 17-7 PH stainless steel and designed with a flange mounting configuration. It is available in a range of hole size options.
Key Product Facts
  • Mounting Configuration: Flange Mount
  • Lohm Rate: 18 Lohms
  • Micron Rating: 100 to 500 microns
  • Part Diameter: 0.500 inches
  • Screenable Passageway Diameter: 0.375 inches
View Product
Etched Safety Screen Filter, 312 Flange Mount, 17-7PH
This etched last chance filter is constructed of 17-7 PH stainless steel and designed with a flange mounting configuration. It is available in a range of hole size options.
Key Product Facts
  • Mounting Configuration: Flange Mount
  • Lohm Rate: 40 Lohms
  • Micron Rating: 100 to 500 microns
  • Part Diameter: 0.312 inches
  • Screenable Passageway Diameter: 0.270 inches
View Product
Etched Safety Screen Filter, 312 Flange Mount, 304L
This etched last chance filter is constructed of 304L stainless steel and designed with a flange mounting configuration. It is available in a range of hole size options.
Key Product Facts
  • Mounting Configuration: Flange Mount
  • Lohm Rate: 40 Lohms
  • Micron Rating: 75 to 500 microns
  • Part Diameter: 0.312 inches
  • Screenable Passageway Diameter: 0.270 inches
View Product
Etched Safety Screen Filter, 375 Flange Mount, 304L
This etched last chance filter is constructed of 304L stainless steel and designed with a flange mounting configuration. It is available in a range of hole size options.
Key Product Facts
  • Mounting Configuration: Flange Mount
  • Lohm Rate: 20 Lohms
  • Micron Rating: 75 to 500 microns
  • Part Diameter: 0.375 inches
  • Screenable Passageway Diameter: 0.333 inches
View Product
Etched Safety Screen Filter, 375 Flange Mount, 17-7PH
This etched last chance filter is constructed of 17-7 PH stainless steel and designed with a flange mounting configuration. It is available in a range of hole size options.
Key Product Facts
  • Mounting Configuration: Flange Mount
  • Lohm Rate: 20 Lohms
  • Micron Rating: 100 to 500 microns
  • Part Diameter: 0.375 inches
  • Screenable Passageway Diameter: 0.333 inches
View Product
Etched Safety Screen Filter, 500 Flange Mount, 304L
This etched last chance filter is constructed of 304L stainless steel and designed with a flange mounting configuration. It is available in a range of hole size options.
Key Product Facts
  • Mounting Configuration: Flange Mount
  • Lohm Rate: 18 Lohms
  • Micron Rating: 75 to 500 microns
  • Part Diameter: 0.500 inches
  • Screenable Passageway Diameter: 0.375 inches
View Product
Etched Safety Screen Filter, 255 Flange Mount, 304L
This etched last chance filter is constructed of 304L stainless steel and designed with a flange mounting configuration. It is available in a range of hole size options.
Key Product Facts
  • Mounting Configuration: Flange Mount
  • Lohm Rate: 85 Lohms
  • Micron Rating: 75 to 500 microns
  • Part Diameter: 0.255 inches
  • Screenable Passageway Diameter: 0.210 inches
View Product
Etched Safety Screen Filter, 230 Flange Mount, 17-7PH
This etched last chance filter is constructed of 17-7 PH stainless steel and designed with a flange mounting configuration. It is available in a range of hole size options.
Key Product Facts
  • Mounting Configuration: Flange Mount
  • Lohm Rate: 95 Lohms
  • Micron Rating: 100 to 500 microns
  • Part Diameter: 0.230 inches
  • Screenable Passageway Diameter: 0.195 inches
View Product
Etched Safety Screen Filter, 230 Flange Mount, 304L
This etched last chance filter is constructed of 304L stainless steel and designed with a flange mounting configuration. It is available in a range of hole size options.
Key Product Facts
  • Mounting Configuration: Flange Mount
  • Lohm Rate: 95 Lohms
  • Micron Rating: 75 to 500 microns
  • Part Diameter: 0.230 inches
  • Screenable Passageway Diameter: 0.195 inches
View Product
Etched Safety Screen Filter, 170 Flange Mount, 17-7PH
This etched last chance filter is constructed of 17-7 PH stainless steel and designed with a flange mounting configuration. It is available in a range of hole size options.
Key Product Facts
  • Mounting Configuration: Flange Mount
  • Lohm Rate: 250 Lohms
  • Micron Rating: 100 to 500 microns
  • Part Diameter: 0.170 inches
  • Screenable Passageway Diameter: 0.14 inches
View Product
Etched Safety Screen Filter, 170 Flange Mount, 304L
This etched last chance filter is constructed of 304L stainless steel and designed with a flange mounting configuration. It is available in a range of hole size options.
Key Product Facts
  • Mounting Configuration: Flange Mount
  • Lohm Rate: 250 Lohms
  • Micron Rating: 75 to 500 microns
  • Part Diameter: 0.170 inches
  • Screenable Passageway Diameter: 0.14 inches
View Product
Etched Safety Screen Filter, 130 Flange Mount, 17-7PH
This etched last chance filter is constructed of 17-7 PH stainless steel and designed with a flange mounting configuration. It is available in a range of hole size options.
Key Product Facts
  • Mounting Configuration: Flange Mount
  • Lohm Rate: 250 Lohms
  • Micron Rating: 100 to 500 microns
  • Part Diameter: 0.130 inches
  • Screenable Passageway Diameter: 0.126 inches
View Product
Etched Safety Screen Filter, 130 Flange Mount, 304L
This etched last chance filter is constructed of 304L stainless steel and designed with a flange mounting configuration. It is available in a range of hole size options.
Key Product Facts
  • Mounting Configuration: Flange Mount
  • Lohm Rate: 250 Lohms
  • Micron Rating: 75 to 500 microns
  • Part Diameter: 0.130 inches
  • Screenable Passageway Diameter: 0.126 inches
View Product
16 mm Cartridge Safety Screen Filter
Our highest pressure rated woven wire mesh safety screen filter design. It's designed to be placed in a flat bottom hole and retained by a secondary means.
Key Product Facts
  • Mounting Configuration: Cartridge - Customer Retained
  • Lohm Rate: As low as 15 Lohms
  • Micron Rating: 40 to 300 microns
  • Part Diameter: 15.93 mm
  • Screenable Passageway Diameter: As large as 13.08 mm
View Product
5.5 mm Insert Safety Screen Filter
This stainless steel, woven wire mesh, safety screen filter has a locking end designed for direct installation into metal housings.
Key Product Facts
  • Mounting Configuration: Insert - Into Metal
  • Lohm Rate: As low as 180 Lohms
  • Micron Rating: 40 to 170 microns
  • Part Diameter: 5.48 mm
  • Screenable Passageway Diameter: 4.5 mm
View Product
8 mm Insert Safety Screen Filter
This stainless steel, woven wire mesh, safety screen filter has a locking end designed for direct installation into metal housings.
Key Product Facts
  • Mounting Configuration: Insert - Into Metal
  • Lohm Rate: As low as 65 Lohms
  • Micron Rating: 40 to 170 microns
  • Part Diameter: 8.00 mm
  • Screenable Passageway Diameter: 7.0 mm
View Product

No Results

No results match your search

Clear all Filters

Get In Touch

Not Finding What You’re Looking For? We’re Here to Help.

If you’re having trouble finding what you need, our team is ready to help you. We have an extensive resource library and a team of degreed engineers who have decades of experience solving complex fluid control problems.