Close Menu

Product Finder

11 Products Found
2.5 mm Brass Press-In Single-Orifice Restrictor for Gases
This accurate flow restrictor is designed for installation into plastic housings and fittings. It is flow tested on gas and constructed of brass.
Key Product Facts
  • Mounting Configuration: Press-In - Into Plastic
  • Diameter: 2.54 mm
  • Metered Flow Range: 500 - 45,000 Lohms
  • Test Fluid: Clean & Dry Nitrogen
  • Maximum Working Pressure: Dependent on Housing Material
View Product
2.5 mm 303 Stainless Steel Press-In Single-Orifice Restrictor for Gases
This accurate flow restrictor is designed for installation into plastic housings and fittings. It is flow tested on gas and constructed of 303 stainless steel.
Key Product Facts
  • Mounting Configuration: Press-In - Into Plastic
  • Diameter: 2.54 mm
  • Metered Flow Range: 500 - 45,000 Lohms
  • Test Fluid: Clean & Dry Nitrogen
  • Maximum Working Pressure: Dependent on Housing Material
View Product
2.5 mm 316 Stainless Steel Press-In Single-Orifice Restrictor for Gases
This accurate flow restrictor is designed for installation into plastic housings and fittings. It is flow tested on gas and constructed of 316L stainless steel.
Key Product Facts
  • Mounting Configuration: Press-In - Into Plastic
  • Diameter: 2.54 mm
  • Metered Flow Range: 500 - 45,000 Lohms
  • Test Fluid: Clean & Dry Nitrogen
  • Maximum Working Pressure: Dependent on Housing Material
View Product
2.5 mm Insert Single-Orifice Restrictor for Gases
This accurate flow restrictor is designed for installation into metal housings or manifolds. It is flow tested on gas and constructed of stainless steel.
Key Product Facts
  • Mounting Configuration: Insert - Into Metal
  • Diameter: 2.54 mm
  • Metered Flow Range: 1200 - 45,000 Lohms
  • Test Fluid: Clean & Dry Nitrogen
  • Maximum Working Pressure: 21 MPa (In Aluminum)
View Product
2.5 mm Insert Single-Orifice Restrictor for Liquids
This accurate flow restrictor is designed for installation into metal housings or manifolds. It is flow tested on water and constructed of stainless steel.
Key Product Facts
  • Mounting Configuration: Insert - Into Metal
  • Diameter: 2.54 mm
  • Metered Flow Range: 1200 - 45,000 Lohms
  • Test Fluid: Distilled Water
  • Maximum Working Pressure: 21 MPa (In Aluminum)
View Product
2.5 mm 303 Stainless Steel Press-In Single-Orifice Restrictor for Liquids
This accurate flow restrictor is designed for installation into plastic housings and fittings. It is flow tested on water and constructed of 303 stainless steel.
Key Product Facts
  • Mounting Configuration: Press-In - Into Plastic
  • Diameter: 2.54 mm
  • Metered Flow Range: 500 - 45,000 Lohms
  • Test Fluid: Distilled Water
  • Maximum Working Pressure: Dependent on Housing Material
View Product
2.5 mm 316 Stainless Steel Press-In Single-Orifice Restrictor for Liquids
This accurate flow restrictor is designed for installation into plastic housings and fittings. It is flow tested on water and constructed of 316L stainless steel.
Key Product Facts
  • Mounting Configuration: Press-In - Into Plastic
  • Diameter: 2.54 mm
  • Metered Flow Range: 500 - 45,000 Lohms
  • Test Fluid: Distilled Water
  • Maximum Working Pressure: Dependent on Housing Material
View Product
5.5 mm Insert Single-Orifice Restrictor for Gases
This accurate flow restrictor is designed for installation into metal housings or manifolds. It is flow tested on gas and constructed of stainless steel.
Key Product Facts
  • Mounting Configuration: Insert - Into Metal
  • Diameter: 5.46 mm
  • Metered Flow Range: 500 - 45,000 Lohms
  • Test Fluid: Clean & Dry Nitrogen
  • Maximum Working Pressure: 21 MPa
View Product
5.5 mm Insert Single-Orifice Restrictor for Liquids
This accurate flow restrictor is designed for installation into metal housings or manifolds. It is flow tested on water and made of stainless steel.
Key Product Facts
  • Mounting Configuration: Insert - Into Metal
  • Diameter: 5.46 mm
  • Metered Flow Range: 500 - 45,000 Lohms
  • Test Fluid: Distilled Water
  • Maximum Working Pressure: 21 MPa
View Product
8 mm Insert Single-Orifice Restrictor for Gases
This accurate flow restrictor is designed for installation into metal housings or manifolds. It is flow tested on gas and constructed of stainless steel.
Key Product Facts
  • Mounting Configuration: Insert - Into Metal
  • Diameter: 7.95 mm
  • Metered Flow Range: 500 - 45,000 Lohms
  • Test Fluid: Clean & Dry Nitrogen
  • Maximum Working Pressure: 21 MPa
View Product
8 mm Insert Single-Orifice Restrictor for Liquids
This accurate flow restrictor is designed for installation into metal housings or manifolds. It is flow tested on water and made of stainless steel.
Key Product Facts
  • Mounting Configuration: Insert - Into Metal
  • Diameter: 7.95 mm
  • Metered Flow Range: 500 - 45,000 Lohms
  • Test Fluid: Distilled Water
  • Maximum Working Pressure: 21 MPa
View Product

No Results

No results match your search

Clear all Filters

Get In Touch

Not Finding What You’re Looking For? We’re Here to Help.

If you’re having trouble finding what you need, our team is ready to help you. We have an extensive resource library and a team of degreed engineers who have decades of experience solving complex fluid control problems.