Close Menu

Product Finder

Lohms represent resistance in a fluid system.
114 Products Found
HI-BAR® Safety Screen Filter, 130 Flange Mount, Titanium
This last chance filter is laser drilled from a single piece of titanium and comes with a flange mount.
Key Product Facts
  • Mounting Configuration: Flange Mount
  • Lohm Rate: 200 to 350 Lohms
  • Micron Rating: 100 to 500 microns
  • Part Diameter: 0.130 inches
  • Screenable Passageway Diameter: 0.125 inches
View Product
Etched Safety Screen Filter, 10 mm Boss Mount, 304L
This etched last chance filter is constructed of 304L stainless steel. It is available in a threaded mounting configuration and a range of standard hole size options.
Key Product Facts
  • Mounting Configuration: Boss Mount
  • Lohm Rate: 20 or 25 Lohms
  • Micron Rating: 75 to 500 microns
  • Part Diameter: 10 mm
  • Screenable Passageway Diameter: 8 mm
View Product
Series 10 and 20 Safety Screen Filters, 230 Flange Mount, 316L
This wire mesh last chance filter is constructed of 316L stainless steel and offers hole sizes of 10 or 20 μm.
Key Product Facts
  • Mounting Configuration: Flange Mount
  • Lohm Rate: 200 or 300 Lohms
  • Micron Rating: 10 or 20 microns
  • Part Diameter: 0.230 inches
  • Screenable Passageway Diameter: 0.195 inches
View Product
Strainer, 106 Boss Mount, 304L
This strainer is made of 304L stainless steel, provides course filtration and is available in a low profile, boss mounting configuration.
Key Product Facts
  • Mounting Configuration: Boss Mount
  • Lohm Rate: 2.5 Lohms
  • Micron Rating: 965 or 1575 microns
  • Part Diameter: 1.0625 inches
View Product
HI-BAR® Safety Screen Filter, 562 Boss Access, 15-5PH
This last chance filter is laser drilled from a single piece of 15-5PH stainless steel. It is available with a boss access installation and a range of standard hole size options.
Key Product Facts
  • Mounting Configuration: Boss Access
  • Lohm Rate: 12 or 15 Lohms
  • Micron Rating: 75 to 500 microns
  • Part Diameter: 0.5625 inch thread
  • Screenable Passageway Diameter: 0.487 inches
View Product
HI-BAR® Safety Screen Filter, 250 Insert Retained
This last chance filter is laser drilled from stainless steel and integrates a Lee locking end to allow for simple installation directly into a fluid passageway.
Key Product Facts
  • Mounting Configuration: Insert Retained
  • Lohm Rate: 70 to 110 Lohms
  • Micron Rating: 50 to 500 microns
  • Part Diameter: 0.250 inches
  • Screenable Passageway Diameter: 0.19 inches
View Product
Etched Safety Screen Filter, 500 Flange Mount, 17-7PH
This etched last chance filter is constructed of 17-7 PH stainless steel and designed with a flange mounting configuration. It is available in a range of hole size options.
Key Product Facts
  • Mounting Configuration: Flange Mount
  • Lohm Rate: 18 Lohms
  • Micron Rating: 100 to 500 microns
  • Part Diameter: 0.500 inches
  • Screenable Passageway Diameter: 0.375 inches
View Product
HI-BAR® Safety Screen Filter, 875 Boss Mount, 15-5PH
This last chance filter is laser drilled from a single piece of 15-5PH stainless steel. It is available in a threaded mounting configuration and a range of standard hole size options.
Key Product Facts
  • Mounting Configuration: Boss Mount
  • Lohm Rate: 4 or 5 Lohms
  • Micron Rating: 75 to 500 microns
  • Part Diameter: 0.875 inches
  • Screenable Passageway Diameter: 0.799 inches
View Product
HI-BAR® Safety Screen Filter in an AECMA EN2604-12 Metric Dynamic Beam Seal Ring Locked Adapter
This laser drilled last chance filter comes in a AECMA EN2604-12 Metric Dynamic Beam Seal Ring Locked Adapter.
Key Product Facts
  • Mounting Configuration: Ring Locked Adapter
  • Lohm Rate: 10 or 13 Lohms
  • Micron Rating: 50 to 500 microns
View Product
HI-BAR® Safety Screen Filter in an AS4383-08-06 Dynamic Beam Seal Ring Locked Adapter
This laser drilled last chance filter comes in a AS4383-08-06 Dynamic Beam Seal Ring Locked Adapter.
Key Product Facts
  • Mounting Configuration: Ring Locked Adapter
  • Lohm Rate: 20 or 25 Lohms
  • Micron Rating: 50 to 500 microns
View Product
HI-BAR® Safety Screen Filter in an AS4375-04 4K Flareless Tube Ring Locked Adapter
This laser drilled last chance filter comes in a AS4375-04, 4K Flareless Tube Ring Locked Adapter.
Key Product Facts
  • Mounting Configuration: Ring Locked Adapter
  • Lohm Rate: 35 or 40 Lohms
  • Micron Rating: 50 to 500 microns
View Product
1301 Flange Mount Safety Screen Filter
This drilled last chance filter is constructed of 304L stainless steel. It is capable of handling burst and collapse pressures up to 3000 psid.
Key Product Facts
  • Mounting Configuration: Flange Mount
  • Lohm Rate: 250 Lohms
  • Micron Rating: 380 or 510 microns
  • Part Diameter: 0.130 inches
  • Screenable Passageway Diameter: 0.126 inches
View Product
187 Twis™ Etched Safety Screen Filter
This etched last chance filter is available with integral TWIS spring retention and a range of standard hole size options.
Key Product Facts
  • Mounting Configuration: Spring Retained
  • Lohm Rate: 80 Lohms
  • Micron Rating: 75 to 500 microns
  • Part Diameter: 0.187 inches
  • Screenable Passageway Diameter: 0.155 inches
View Product
Drilled Safety Screen Filter, 187 Insert Retained
This drilled last chance filter is constructed of 304L stainless steel. It integrates a Lee locking end to allow for simple installation directly into a fluid passageway.
Key Product Facts
  • Mounting Configuration: Insert Retained
  • Lohm Rate: 200 Lohms
  • Micron Rating: 380 or 510 microns
  • Part Diameter: 0.187 inches
  • Screenable Passageway Diameter: 0.162 inches
View Product
Etched Safety Screen Filter, 312 Boss Mount, 304L
This etched last chance filter is constructed of 304L stainless steel. It is available in a threaded mounting configuration and a range of standard hole size options.
Key Product Facts
  • Mounting Configuration: Boss Mount
  • Lohm Rate: 85 Lohms
  • Micron Rating: 75 to 500 microns
  • Part Diameter: 0.312 inches
  • Screenable Passageway Diameter: 0.187 inches
View Product
Etched Safety Screen Filter, 312 Flange Mount, 304L
This etched last chance filter is constructed of 304L stainless steel and designed with a flange mounting configuration. It is available in a range of hole size options.
Key Product Facts
  • Mounting Configuration: Flange Mount
  • Lohm Rate: 40 Lohms
  • Micron Rating: 75 to 500 microns
  • Part Diameter: 0.312 inches
  • Screenable Passageway Diameter: 0.270 inches
View Product
Etched Safety Screen Filter, 656 Flange Mount, 17-7PH
This etched last chance filter is constructed of 17-7 PH stainless steel and designed with a flange mounting configuration. It is available in a range of hole size options.
Key Product Facts
  • Mounting Configuration: Flange Mount
  • Lohm Rate: 8 Lohms
  • Micron Rating: 100 to 500 microns
  • Part Diameter: 0.656 inches
  • Screenable Passageway Diameter: 0.540 inches
View Product
Etched Safety Screen Filter, 656 Flange Mount, 304L
This etched last chance filter is constructed of 304L stainless steel and designed with a flange mounting configuration. It is available in a range of hole size options.
Key Product Facts
  • Mounting Configuration: Flange Mount
  • Lohm Rate: 8 Lohms
  • Micron Rating: 75 to 500 microns
  • Part Diameter: 0.656 inches
  • Screenable Passageway Diameter: 0.540 inches
View Product
Etched Safety Screen Filter, 187 Insert Retained
This etched last chance filter is constructed of 304L stainless steel. It integrates a Lee locking end to allow for simple installation directly into a fluid passageway.
Key Product Facts
  • Mounting Configuration: Insert Retained
  • Lohm Rate: 250 Lohms
  • Micron Rating: 75 to 500 microns
  • Part Diameter: 0.187 inches
  • Screenable Passageway Diameter: 0.162 inches
View Product
Etched Safety Screen Filter, 250 Insert Retained
This etched last chance filter is constructed of 304L stainless steel. It integrates a Lee locking end to allow for simple installation directly into a fluid passageway.
Key Product Facts
  • Mounting Configuration: Insert Retained
  • Lohm Rate: 75 Lohms
  • Micron Rating: 75 to 500 microns
  • Part Diameter: 0.250 inches
  • Screenable Passageway Diameter: 0.19 inches
View Product
Etched Safety Screen Filter, 281 Insert Retained
This etched last chance filter is constructed of 304L stainless steel. It integrates a Lee locking end to allow for simple installation directly into a fluid passageway.
Key Product Facts
  • Mounting Configuration: Insert Retained
  • Lohm Rate: 40 Lohms
  • Micron Rating: 75 to 500 microns
  • Part Diameter: 0.281 inches
  • Screenable Passageway Diameter: 0.255 inches
View Product
Etched Safety Screen Filter, 375 Boss Mount, 304L
This etched last chance filter is constructed of 304L stainless steel. It is available in a threaded mounting configuration and a range of standard hole size options.
Key Product Facts
  • Mounting Configuration: Boss Mount
  • Lohm Rate: 40 Lohms
  • Micron Rating: 75 to 500 microns
  • Part Diameter: 0.375 inches
  • Screenable Passageway Diameter: 0.281 inches
View Product
Etched Safety Screen Filter, 375 Insert Retained
This etched last chance filter is constructed of 304L stainless steel. It integrates a Lee locking end to allow for simple installation directly into a fluid passageway.
Key Product Facts
  • Mounting Configuration: Insert Retained
  • Lohm Rate: 20 or 25 Lohms
  • Micron Rating: 75 to 500 microns
  • Part Diameter: 0.375 inches
  • Screenable Passageway Diameter: 0.335 inches
View Product
Etched Safety Screen Filter, 437 Boss Mount, 304L
This etched last chance filter is constructed of 304L stainless steel. It is available in a threaded mounting configuration and a range of standard hole size options.
Key Product Facts
  • Mounting Configuration: Boss Mount
  • Lohm Rate: 20 or 25 Lohms
  • Micron Rating: 75 to 500 microns
  • Part Diameter: 0.437 inches
  • Screenable Passageway Diameter: 0.316 inches
View Product
Etched Safety Screen Filter, 500 Boss Mount, 304L
This etched last chance filter is constructed of 304L stainless steel. It is available in a threaded mounting configuration and a range of standard hole size options.
Key Product Facts
  • Mounting Configuration: Boss Mount
  • Lohm Rate: 18 Lohms
  • Micron Rating: 75 to 500 microns
  • Part Diameter: 0.500 inches
  • Screenable Passageway Diameter: 0.375 inches
View Product
Etched Safety Screen Filter, 500 Insert Retained
This etched last chance filter is constructed of 304L stainless steel. It integrates a Lee locking end to allow for simple installation directly into a fluid passageway.
Key Product Facts
  • Mounting Configuration: Insert Retained
  • Lohm Rate: 12 Lohms
  • Micron Rating: 75 to 500 microns
  • Part Diameter: 0.5 inches
  • Screenable Passageway Diameter: 0.465 inches
View Product
Etched Safety Screen Filter, 562 Boss Mount, 304L
This etched last chance filter is constructed of 304L stainless steel. It is available in a threaded mounting configuration and a range of standard hole size options.
Key Product Facts
  • Mounting Configuration: Boss Mount
  • Lohm Rate: 16 Lohms
  • Micron Rating: 75 to 500 microns
  • Part Diameter: 0.562 inches
  • Screenable Passageway Diameter: 0.39 inches
View Product
Etched Safety Screen Filter, 750 Boss Mount, 304L
This etched last chance filter is constructed of 304L stainless steel. It is available in a threaded mounting configuration and a range of standard hole size options.
Key Product Facts
  • Mounting Configuration: Boss Mount
  • Lohm Rate: 8 Lohms
  • Micron Rating: 75 to 500 microns
  • Part Diameter: 0.750 inches
  • Screenable Passageway Diameter: 0.53 inches
View Product
170 Spring Retained Etched Safety Screen Filter
This etched last chance filter is constructed of 304L stainless steel. It comes with a flange mount and a retention spring to allow for economical retention with unidirectional flow.
Key Product Facts
  • Mounting Configuration: Spring Retained
  • Lohm Rate: 250 Lohms
  • Micron Rating: 75 to 500 microns
  • Part Diameter: 0.170 inches
  • Screenable Passageway Diameter: 0.07 inches
View Product
L-4 Etched Safety Screen Filter, 187 Insert Retained
This etched last chance filter is constructed of 304L stainless steel. It integrates with a Lee L-4 locking end to allow for simple installation directly into a fluid passageway with no support shoulder required.
Key Product Facts
  • Mounting Configuration: Insert Retained
  • Lohm Rate: 85 Lohms
  • Micron Rating: 75 to 500 microns
  • Part Diameter: 0.187 inches
  • Screenable Passageway Diameter: 0.190 inches
View Product
L-4 Etched Safety Screen Filter, 281 Insert Retained
This etched last chance filter is constructed of 304L stainless steel. It integrates with a Lee L-4 locking end to allow for simple installation directly into a fluid passageway with no support shoulder required.
Key Product Facts
  • Mounting Configuration: Insert Retained
  • Lohm Rate: 40 Lohms
  • Micron Rating: 75 to 500 microns
  • Part Diameter: 0.281 inches
  • Screenable Passageway Diameter: 0.283 inches
View Product
Etched Safety Screen Filter, 130 Flange Mount, 17-7PH
This etched last chance filter is constructed of 17-7 PH stainless steel and designed with a flange mounting configuration. It is available in a range of hole size options.
Key Product Facts
  • Mounting Configuration: Flange Mount
  • Lohm Rate: 250 Lohms
  • Micron Rating: 100 to 500 microns
  • Part Diameter: 0.130 inches
  • Screenable Passageway Diameter: 0.126 inches
View Product
Etched Safety Screen Filter, 130 Flange Mount, 304L
This etched last chance filter is constructed of 304L stainless steel and designed with a flange mounting configuration. It is available in a range of hole size options.
Key Product Facts
  • Mounting Configuration: Flange Mount
  • Lohm Rate: 250 Lohms
  • Micron Rating: 75 to 500 microns
  • Part Diameter: 0.130 inches
  • Screenable Passageway Diameter: 0.126 inches
View Product
Etched Safety Screen Filter, 170 Flange Mount, 17-7PH
This etched last chance filter is constructed of 17-7 PH stainless steel and designed with a flange mounting configuration. It is available in a range of hole size options.
Key Product Facts
  • Mounting Configuration: Flange Mount
  • Lohm Rate: 250 Lohms
  • Micron Rating: 100 to 500 microns
  • Part Diameter: 0.170 inches
  • Screenable Passageway Diameter: 0.14 inches
View Product
Etched Safety Screen Filter, 170 Flange Mount, 304L
This etched last chance filter is constructed of 304L stainless steel and designed with a flange mounting configuration. It is available in a range of hole size options.
Key Product Facts
  • Mounting Configuration: Flange Mount
  • Lohm Rate: 250 Lohms
  • Micron Rating: 75 to 500 microns
  • Part Diameter: 0.170 inches
  • Screenable Passageway Diameter: 0.14 inches
View Product
Etched Safety Screen Filter, 230 Flange Mount, 17-7PH
This etched last chance filter is constructed of 17-7 PH stainless steel and designed with a flange mounting configuration. It is available in a range of hole size options.
Key Product Facts
  • Mounting Configuration: Flange Mount
  • Lohm Rate: 95 Lohms
  • Micron Rating: 100 to 500 microns
  • Part Diameter: 0.230 inches
  • Screenable Passageway Diameter: 0.195 inches
View Product
Etched Safety Screen Filter, 230 Flange Mount, 304L
This etched last chance filter is constructed of 304L stainless steel and designed with a flange mounting configuration. It is available in a range of hole size options.
Key Product Facts
  • Mounting Configuration: Flange Mount
  • Lohm Rate: 95 Lohms
  • Micron Rating: 75 to 500 microns
  • Part Diameter: 0.230 inches
  • Screenable Passageway Diameter: 0.195 inches
View Product
Etched Safety Screen Filter, 255 Flange Mount, 304L
This etched last chance filter is constructed of 304L stainless steel and designed with a flange mounting configuration. It is available in a range of hole size options.
Key Product Facts
  • Mounting Configuration: Flange Mount
  • Lohm Rate: 85 Lohms
  • Micron Rating: 75 to 500 microns
  • Part Diameter: 0.255 inches
  • Screenable Passageway Diameter: 0.210 inches
View Product
Etched Safety Screen Filter, 312 Flange Mount, 17-7PH
This etched last chance filter is constructed of 17-7 PH stainless steel and designed with a flange mounting configuration. It is available in a range of hole size options.
Key Product Facts
  • Mounting Configuration: Flange Mount
  • Lohm Rate: 40 Lohms
  • Micron Rating: 100 to 500 microns
  • Part Diameter: 0.312 inches
  • Screenable Passageway Diameter: 0.270 inches
View Product
Etched Safety Screen Filter, 375 Flange Mount, 17-7PH
This etched last chance filter is constructed of 17-7 PH stainless steel and designed with a flange mounting configuration. It is available in a range of hole size options.
Key Product Facts
  • Mounting Configuration: Flange Mount
  • Lohm Rate: 20 Lohms
  • Micron Rating: 100 to 500 microns
  • Part Diameter: 0.375 inches
  • Screenable Passageway Diameter: 0.333 inches
View Product
Etched Safety Screen Filter, 375 Flange Mount, 304L
This etched last chance filter is constructed of 304L stainless steel and designed with a flange mounting configuration. It is available in a range of hole size options.
Key Product Facts
  • Mounting Configuration: Flange Mount
  • Lohm Rate: 20 Lohms
  • Micron Rating: 75 to 500 microns
  • Part Diameter: 0.375 inches
  • Screenable Passageway Diameter: 0.333 inches
View Product
Etched Safety Screen Filter, 500 Flange Mount, 304L
This etched last chance filter is constructed of 304L stainless steel and designed with a flange mounting configuration. It is available in a range of hole size options.
Key Product Facts
  • Mounting Configuration: Flange Mount
  • Lohm Rate: 18 Lohms
  • Micron Rating: 75 to 500 microns
  • Part Diameter: 0.500 inches
  • Screenable Passageway Diameter: 0.375 inches
View Product
HI-BAR® Inlet Safety Screen Filter, Flareless AS33514E04 to Port AS930-04
This laser drilled last chance filter comes in a Flareless AS33514E04 to Port AS930-04.
Key Product Facts
  • Mounting Configuration: Flareless Fitting
  • Lohm Rate: 30 to 55 Lohms
  • Micron Rating: 50 to 500 microns
View Product
HI-BAR® Inlet Safety Screen Filter, Flareless AS33514E06 to Port AS930-06
This laser drilled last chance filter comes in a Flareless AS33514E06 to Port AS930-06.
Key Product Facts
  • Mounting Configuration: Flareless Fitting
  • Lohm Rate: 12 to 25 Lohms
  • Micron Rating: 50 to 500 microns
View Product
HI-BAR® Inlet Safety Screen Filter, Flareless AS33514E08 to Port AS930-08
This laser drilled last chance filter comes in a Flareless AS33514E08 to Port AS930-08.
Key Product Facts
  • Mounting Configuration: Flareless Fitting
  • Lohm Rate: 7 to 12 Lohms
  • Micron Rating: 50 to 500 microns
View Product
HI-BAR® Inlet Safety Screen Filter, Flareless AS33514E10 to Port AS930-10
This laser drilled last chance filter comes in a Flareless AS33514E10 to Port AS930-10.
Key Product Facts
  • Mounting Configuration: Flareless Fitting
  • Lohm Rate: 5 to 10 Lohms
  • Micron Rating: 50 to 500 microns
View Product
HI-BAR® Safety Screen Filter, 130 Flange Mount, 15-5PH
This last chance filter is laser drilled from a single piece of 15-5PH stainless steel. It comes with a flange mount and is available in a range of hole size options.
Key Product Facts
  • Mounting Configuration: Flange Mount
  • Lohm Rate: 200 to 800 Lohms
  • Micron Rating: 25 to 500 microns
  • Part Diameter: 0.130 inches
  • Screenable Passageway Diameter: 0.125 inches
View Product
HI-BAR® Safety Screen Filter, 187 Insert Retained
This last chance filter is laser drilled from stainless steel and integrates a Lee locking end to allow for simple installation directly into a fluid passageway.
Key Product Facts
  • Mounting Configuration: Insert Retained
  • Lohm Rate: 140 to 250 Lohms
  • Micron Rating: 50 to 500 microns
  • Part Diameter: 0.187 inches
  • Screenable Passageway Diameter: 0.14 inches
View Product
HI-BAR® Safety Screen, 230 Flange Mount, 17-4PH
This last chance filter is laser drilled from a single piece of 15-5PH stainless steel. It comes with a flange mount and is available in a range of hole size options.
Key Product Facts
  • Mounting Configuration: Flange Mount
  • Lohm Rate: 90 to 275 Lohms
  • Micron Rating: 25 to 500 microns
  • Part Diameter: 0.230 inches
  • Screenable Passageway Diameter: 0.19 inches
View Product
HI-BAR® Safety Screen Filter, 230 Flange Mount, Titanium
This last chance filter is laser drilled from a single piece of titanium and comes with a flange mount.
Key Product Facts
  • Mounting Configuration: Flange Mount
  • Lohm Rate: 90 or 95 Lohms
  • Micron Rating: 100 to 500 microns
  • Part Diameter: 0.230 inches
  • Screenable Passageway Diameter: 0.19 inches
View Product
HI-BAR® Safety Screen Filter, 250 Boss Mount, 15-5PH
This last chance filter is laser drilled from a single piece of 15-5PH stainless steel. It is available in a threaded mounting configuration and a range of standard hole size options.
Key Product Facts
  • Mounting Configuration: Boss Mount
  • Lohm Rate: 45 to 100 Lohms
  • Micron Rating: 50 to 500 microns
  • Part Diameter: 0.250 inches
  • Screenable Passageway Diameter: 0.218 inches
View Product
HI-BAR® Safety Screen Filter, 330 Flange Mount, 17-4PH
This last chance filter is laser drilled from a single piece of 17-4PH stainless steel. It comes with a flange mount and is available in a range of hole size options.
Key Product Facts
  • Mounting Configuration: Flange Mount
  • Lohm Rate: 40 to 100 Lohms
  • Micron Rating: 25 to 500 microns
  • Part Diameter: 0.330 inches
  • Screenable Passageway Diameter: 0.26 inches
View Product
HI-BAR® Safety Screen Filter, 375 Insert Retained
This last chance filter is laser drilled from stainless steel and integrates a Lee locking end to allow for simple installation directly into a fluid passageway.
Key Product Facts
  • Mounting Configuration: Insert Retained
  • Lohm Rate: 25 to 75 Lohms
  • Micron Rating: 50 to 500 microns
  • Part Diameter: 0.375 inches
  • Screenable Passageway Diameter: 0.31 inches
View Product
HI-BAR® Safety Screen Filter, 380 Flange Mount, 17-4PH
This last chance filter is laser drilled from a single piece of 17-4PH stainless steel. It comes with a flange mount and is available in a range of hole size options.
Key Product Facts
  • Mounting Configuration: Flange Mount
  • Lohm Rate: 30 to 75 Lohms
  • Micron Rating: 25 to 500 microns
  • Part Diameter: 0.380 inches
  • Screenable Passageway Diameter: 0.31 inches
View Product
HI-BAR® Safety Screen Filter, 380 Flange Mount, Titanium
This last chance filter is laser drilled from a single piece of titanium and comes with a flange mount.
Key Product Facts
  • Mounting Configuration: Flange Mount
  • Lohm Rate: 30 or 35 Lohms
  • Micron Rating: 100 to 500 microns
  • Part Diameter: 0.380 inches
  • Screenable Passageway Diameter: 0.31 inches
View Product
HI-BAR® Safety Screen Filter, 495 Flange Mount, 17-4PH
This last chance filter is laser drilled from a single piece of 17-4PH stainless steel. It comes with a flange mount and is available in a range of hole size options.
Key Product Facts
  • Mounting Configuration: Flange Mount
  • Lohm Rate: 20 to 35 Lohms
  • Micron Rating: 25 to 500 microns
  • Part Diameter: 0.495 inches
  • Screenable Passageway Diameter: 0.40 inches
View Product
HI-BAR® Safety Screen Filter, 495 Flange Mount, Titanium
This last chance filter is laser drilled from a single piece of titanium and comes with a flange mount.
Key Product Facts
  • Mounting Configuration: Flange Mount
  • Lohm Rate: 20 Lohms
  • Micron Rating: 100 to 500 microns
  • Part Diameter: 0.495 inches
  • Screenable Passageway Diameter: 0.40 inches
View Product
HI-BAR® Safety Screen Filter, 562 Boss Mount, 15-5PH
This last chance filter is laser drilled from a single piece of 15-5PH stainless steel. It is available in a threaded mounting configuration and a range of standard hole size options.
Key Product Facts
  • Mounting Configuration: Boss Mount
  • Lohm Rate: 8 to 20 Lohms
  • Micron Rating: 50 to 500 microns
  • Part Diameter: 0.5625 inches
  • Screenable Passageway Diameter: 0.503 inches
View Product
HI-BAR® Safety Screen Filter, 670 Flange Mount, 17-4PH
This last chance filter is laser drilled from a single piece of 17-4PH stainless steel. It comes with a flange mount and is available in a range of hole size options.
Key Product Facts
  • Mounting Configuration: Flange Mount
  • Lohm Rate: 10 to 25 Lohms
  • Micron Rating: 25 to 500 microns
  • Part Diameter: 0.670 inches
  • Screenable Passageway Diameter: 0.52 inches
View Product
HI-BAR® Safety Screen Filter, 670 Flange Mount, Titanium
This last chance filter is laser drilled from a single piece of titanium and comes with a flange mount.
Key Product Facts
  • Mounting Configuration: Flange Mount
  • Lohm Rate: 10 Lohms
  • Micron Rating: 100 to 500 microns
  • Part Diameter: 0.670 inches
  • Screenable Passageway Diameter: 0.52 inches
View Product
HI-BAR® Safety Screen Filter, 687 Boss Mount, 15-5PH
This last chance filter is laser drilled from a single piece of 15-5PH stainless steel. It is available in a threaded mounting configuration and a range of standard hole size options.
Key Product Facts
  • Mounting Configuration: Boss Mount
  • Lohm Rate: 6 to 10 Lohms
  • Micron Rating: 50 to 500 microns
  • Part Diameter: 0.6875 inches
  • Screenable Passageway Diameter: 0.641 inches
View Product
HI-BAR® Safety Screen Filter, 750 Boss Mount, 15-5PH
This last chance filter is laser drilled from a single piece of 15-5PH stainless steel. It is available in a threaded mounting configuration and a range of standard hole size options.
Key Product Facts
  • Mounting Configuration: Boss Mount
  • Lohm Rate: 5 to 8 Lohms
  • Micron Rating: 50 to 500 microns
  • Part Diameter: 0.750 inches
  • Screenable Passageway Diameter: 0.684 inches
View Product
HI-BAR® Safety Screen Filter, 812 Boss Mount, 15-5PH
This last chance filter is laser drilled from a single piece of 15-5PH stainless steel. It is available in a threaded mounting configuration and a range of standard hole size options.
Key Product Facts
  • Mounting Configuration: Boss Mount
  • Lohm Rate: 4 to 6 Lohms
  • Micron Rating: 50 to 500 microns
  • Part Diameter: 0.8125 inches
  • Screenable Passageway Diameter: 0.758 inches
View Product
HI-BAR® Safety Screen Filter, 500 Insert Retained
This last chance filter is laser drilled from stainless steel and integrates a Lee locking end to allow for simple installation directly into a fluid passageway.
Key Product Facts
  • Mounting Configuration: Insert Retained
  • Lohm Rate: 15 to 40 Lohms
  • Micron Rating: 50 to 500 microns
  • Part Diameter: 0.5 inches
  • Screenable Passageway Diameter: 0.41 inches
View Product
HI-BAR® Safety Screen Filter, 250 Boss Access, 15-5PH
This last chance filter is laser drilled from a single piece of 15-5PH stainless steel. It is available with a boss access installation and a range of standard hole size options.
Key Product Facts
  • Mounting Configuration: Boss Access
  • Lohm Rate: 65 or 90 Lohms
  • Micron Rating: 75 to 500 microns
  • Part Diameter: 0.250 inch thread
  • Screenable Passageway Diameter: 0.193 inches
View Product
HI-BAR® Safety Screen Filter, 312 Boss Access, 15-5PH
This last chance filter is laser drilled from a single piece of 15-5PH stainless steel. It is available with a boss access installation and a range of standard hole size options.
Key Product Facts
  • Mounting Configuration: Boss Access
  • Lohm Rate: 45 or 60 Lohms
  • Micron Rating: 75 to 500 microns
  • Part Diameter: 0.312 inch thread
  • Screenable Passageway Diameter: 0.252 inches
View Product
HI-BAR® Safety Screen Filter, 312 Boss Mount, 15-5PH
This last chance filter is laser drilled from a single piece of 15-5PH stainless steel. It is available in a threaded mounting configuration and a range of standard hole size options.
Key Product Facts
  • Mounting Configuration: Boss Mount
  • Lohm Rate: 35 to 90 Lohms
  • Micron Rating: 50 to 500 microns
  • Part Diameter: 0.312 inches
  • Screenable Passageway Diameter: 0.276 inches
View Product
HI-BAR® Safety Screen Filter, 437 Boss Access, 15-5PH
This last chance filter is laser drilled from a single piece of 15-5PH stainless steel. It is available with a boss access installation and a range of standard hole size options.
Key Product Facts
  • Mounting Configuration: Boss Access
  • Lohm Rate: 20 Lohms
  • Micron Rating: 75 to 500 microns
  • Part Diameter: 0.4375 inch thread
  • Screenable Passageway Diameter: 0.362 inches
View Product
HI-BAR® Safety Screen Filter, 437 Boss Mount, 15-5PH
This last chance filter is laser drilled from a single piece of 15-5PH stainless steel. It is available in a threaded mounting configuration and a range of standard hole size options.
Key Product Facts
  • Mounting Configuration: Boss Mount
  • Lohm Rate: 15 to 35 Lohms
  • Micron Rating: 50 to 500 microns
  • Part Diameter: 0.4375 inches
  • Screenable Passageway Diameter: 0.383 inches
View Product
HI-BAR® Safety Screen Filter, Extended Length, 562 Boss Mount, 15-5PH
This last chance filter is laser drilled from a single piece of 15-5PH stainless steel. It is available with a boss access installation and a range of standard hole size options.
Key Product Facts
  • Mounting Configuration: Boss Mount
  • Lohm Rate: 8 or 15 Lohms
  • Micron Rating: 50 to 500 microns
  • Part Diameter: 0.5625 inches
  • Screenable Passageway Diameter: 0.503 inches
View Product
HI-BAR® Safety Screen, Extended Length, MJ10 Boss Mount, 15-5PH
This last chance filter is laser drilled from a single piece of 15-5PH stainless steel. It is available with a threaded mounting configuration and a range of standard hole size options.
Key Product Facts
  • Mounting Configuration: Boss Mount
  • Lohm Rate: 17 to 40 Lohms
  • Micron Rating: 50 to 500 microns
  • Part Diameter: 10 mm
  • Screenable Passageway Diameter: 8.88 mm
View Product
HI-BAR® Safety Screen, Extended Length, MJ12 Boss Mount, 15-5PH
This last chance filter is laser drilled from a single piece of 15-5PH stainless steel. It is available with a threaded mounting configuration and a range of standard hole size options.
Key Product Facts
  • Mounting Configuration: Boss Mount
  • Lohm Rate: 13 to 22 Lohms
  • Micron Rating: 50 to 500 microns
  • Part Diameter: 12 mm
  • Screenable Passageway Diameter: 10.64 mm
View Product
HI-BAR® Safety Screen Filter, MJ12 Boss Mount, 15-5PH
This last chance filter is laser drilled from a single piece of 15-5PH stainless steel. It is available in a threaded mounting configuration and a range of standard hole size options.
Key Product Facts
  • Mounting Configuration: Boss Mount
  • Lohm Rate: 14 to 28 Lohms
  • Micron Rating: 50 to 500 microns
  • Part Diameter: 12 mm
  • Screenable Passageway Diameter: 10.64 mm
View Product
HI-BAR® Safety Screen Filter, MJ14 Boss Mount, 15-5PH
This last chance filter is laser drilled from a single piece of 15-5PH stainless steel. It is available in a threaded mounting configuration and a range of standard hole size options.
Key Product Facts
  • Mounting Configuration: Boss Mount
  • Lohm Rate: 9 to 21 Lohms
  • Micron Rating: 50 to 500 microns
  • Part Diameter: 14 mm
  • Screenable Passageway Diameter: 12.4 mm
View Product
HI-BAR® Safety Screen Filter, MJ16 Boss Mount, 15-5PH
This last chance filter is laser drilled from a single piece of 15-5PH stainless steel. It is available in a threaded mounting configuration and a range of standard hole size options.
Key Product Facts
  • Mounting Configuration: Boss Mount
  • Lohm Rate: 8 to 12 Lohms
  • Micron Rating: 50 to 500 microns
  • Part Diameter: 16 mm
  • Screenable Passageway Diameter: 14.4 mm
View Product
HI-BAR® Safety Screen Filter, MJ18 Boss Mount, 15-5PH
This last chance filter is laser drilled from a single piece of 15-5PH stainless steel. It is available in a threaded mounting configuration and a range of standard hole size options.
Key Product Facts
  • Mounting Configuration: Boss Mount
  • Lohm Rate: 6 to 10 Lohms
  • Micron Rating: 50 to 500 microns
  • Part Diameter: 18 mm
  • Screenable Passageway Diameter: 16.4 mm
View Product
HI-BAR® Safety Screen Filter, MJ20 Boss Mount, 15-5PH
This last chance filter is laser drilled from a single piece of 15-5PH stainless steel. It is available in a threaded mounting configuration and a range of standard hole size options.
Key Product Facts
  • Mounting Configuration: Boss Mount
  • Lohm Rate: 5 to 8 Lohms
  • Micron Rating: 50 to 500 microns
  • Part Diameter: 20 mm
  • Screenable Passageway Diameter: 18.4 mm
View Product
HI-BAR® Safety Screen Filter, MJ22 Boss Mount, 15-5PH
This last chance filter is laser drilled from a single piece of 15-5PH stainless steel. It is available in a threaded mounting configuration and a range of standard hole size options.
Key Product Facts
  • Mounting Configuration: Boss Mount
  • Lohm Rate: 4 or 5 Lohms
  • Micron Rating: 75 to 500 microns
  • Part Diameter: 22 mm
  • Screenable Passageway Diameter: 20.4 mm
View Product
HI-BAR® Safety Screen Filter in a MA2119-10-06 Metric Dynamic Beam Seal Ring Locked Adapter
This laser drilled last chance filter comes in a MA2119-10-06 Metric Dynamic Beam Seal Ring Locked Adapter.
Key Product Facts
  • Mounting Configuration: Ring Locked Adapter
  • Lohm Rate: 35 or 40 Lohms
  • Micron Rating: 50 to 500 microns
View Product
HI-BAR® Safety Screen Filter in a MA2119-10-08 Metric Dynamic Beam Seal Ring Locked Adapter
This laser drilled last chance filter comes in a MA2119-10-08 Metric Dynamic Beam Seal Ring Locked Adapter.
Key Product Facts
  • Mounting Configuration: Ring Locked Adapter
  • Lohm Rate: 35 or 40 Lohms
  • Micron Rating: 50 to 500 microns
View Product
HI-BAR® Safety Screen Filter in a MA2119-14-10 Metric Dynamic Beam Seal Ring Locked Adapter
This laser drilled last chance filter comes in a MA2119-14-10 Metric Dynamic Beam Seal Ring Locked Adapter.
Key Product Facts
  • Mounting Configuration: Ring Locked Adapter
  • Lohm Rate: 20 or 25 Lohms
  • Micron Rating: 50 to 500 microns
View Product
HI-BAR® Safety Screen Filter in an AECMA EN2604-14 Metric Dynamic Beam Seal Ring Locked Adapter
This laser drilled last chance filter comes in a AECMA EN2604-14 Metric Dynamic Beam Seal Ring Locked Adapter.
Key Product Facts
  • Mounting Configuration: Ring Locked Adapter
  • Lohm Rate: 10 or 13 Lohms
  • Micron Rating: 50 to 500 microns
View Product
HI-BAR® Safety Screen Filter in an AECMA EN2604-16 Metric Dynamic Beam Seal Ring Locked Adapter
This laser drilled last chance filter comes in a AECMA EN2604-16 Metric Dynamic Beam Seal Ring Locked Adapter.
Key Product Facts
  • Mounting Configuration: Ring Locked Adapter
  • Lohm Rate: 8 or 9 Lohms
  • Micron Rating: 50 to 500 microns
View Product
HI-BAR® Safety Screen in an AS4375-06 4K Flareless Tube Ring Locked Adapter
This laser drilled last chance filter comes in a AS4375-06, 4K Flareless Tube Ring Locked Adapter.
Key Product Facts
  • Mounting Configuration: Ring Locked Adapter
  • Lohm Rate: 20 or 25 Lohms
  • Micron Rating: 50 to 500 microns
View Product
HI-BAR® Safety Screen Filter in an AS4375-08 4K Flareless Tube Ring Locked Adapter
This laser drilled last chance filter comes in a AS4375-08, 4K Flareless Tube Ring Locked Adapter.
Key Product Facts
  • Mounting Configuration: Ring Locked Adapter
  • Lohm Rate: 10 or 13 Lohms
  • Micron Rating: 50 to 500 microns
View Product
HI-BAR® Safety Screen Filter in an AS4375-10 4K Flareless Tube Ring Locked Adapter
This laser drilled last chance filter comes in a AS4375-10, 4K Flareless Tube Ring Locked Adapter.
Key Product Facts
  • Mounting Configuration: Ring Locked Adapter
  • Lohm Rate: 8 o 9 Lohms
  • Micron Rating: 50 to 500 microns
View Product
HI-BAR® Safety Screen Filter in an AS4383-06-04 Dynamic Beam Seal Ring Locked Adapter
This laser drilled last chance filter comes in a AS4383-06-04 Dynamic Beam Seal Ring Locked Adapter.
Key Product Facts
  • Mounting Configuration: Ring Locked Adapter
  • Lohm Rate: 35 or 40 Lohms
  • Micron Rating: 50 to 500 microns
View Product
HI-BAR® Safety Screen Filter in an AS4383-10-08 Dynamic Beam Seal Ring Locked Adapter
This laser drilled last chance filter comes in a AS4383-10-08 Dynamic Beam Seal Ring Locked Adapter.
Key Product Facts
  • Mounting Configuration: Ring Locked Adapter
  • Lohm Rate: 10 or 13 Lohms
  • Micron Rating: 50 to 500 microns
View Product
HI-BAR® Safety Screen Filter in an AS4383-12-10 Dynamic Beam Seal Ring Locked Adapter
This laser drilled last chance filter comes in a AS4383-12-10 Dynamic Beam Seal Ring Locked Adapter.
Key Product Facts
  • Mounting Configuration: Ring Locked Adapter
  • Lohm Rate: 8 or 9 Lohms
  • Micron Rating: 50 to 500 microns
View Product
HI-BAR® Safety Screen Filter in an AS5550-08 & ABS0993-08 5K Flareless Tube Ring Locked Adapter
This laser drilled last chance filter comes in a AS5550-08 & ABS0993-08, 5K Flareless Tube Ring Locked Adapter.
Key Product Facts
  • Mounting Configuration: Ring Locked Adapter
  • Lohm Rate: 20 or 25 Lohms
  • Micron Rating: 50 to 500 microns
View Product
HI-BAR® Safety Screen Filter in an AS5550-10 & ABS0993-10 5K Flareless Tube Ring Locked Adapter
This laser drilled last chance filter comes in a AS5550-10 & ABS0993-10, 5K Flareless Tube Ring Locked Adapter.
Key Product Facts
  • Mounting Configuration: Ring Locked Adapter
  • Lohm Rate: 10 or 13 Lohms
  • Micron Rating: 50 to 500 microns
View Product
HI-BAR Safety Screen Filter, 437, Extended Length Boss Mount, 15-5PH
This last chance filter is laser drilled from a single piece of 15-5PH stainless steel. It is available with a boss access installation and a range of standard hole size options.
Key Product Facts
  • Mounting Configuration: Boss Mount
  • Lohm Rate: 12 to 20 Lohms
  • Micron Rating: 50 to 500 microns
  • Part Diameter: 0.4375 inches
  • Screenable Passageway Diameter: 0.383 inches
View Product
HI-BAR® Safety Screen Filter in AS5550-06 & ABS0993-06 5K Flareless Tube Ring Locked Adapter
This laser drilled last chance filter comes in a AS5550-06 & ABS0993-06, 5K Flareless Tube Ring Locked Adapter.
Key Product Facts
  • Mounting Configuration: Ring Locked Adapter
  • Lohm Rate: 35 or 40 Lohms
  • Micron Rating: 50 to 500 microns
View Product
HI-BAR® Safety Screen Filter in an AS5550-04 & ABS0993-04 5K Flareless Tube Ring Locked Adapter
This laser drilled last chance filter comes in a AS5550-04 & ABS0993-04, 5K Flareless Tube Ring Locked Adapter.
Key Product Facts
  • Mounting Configuration: Ring Locked Adapter
  • Lohm Rate: 85 or 95 Lohms
  • Micron Rating: 50 to 500 microns
View Product
HI-BAR® Safety Screen Filter, MJ10 Boss Mount, 15-5PH
This last chance filter is laser drilled from a single piece of 15-5PH stainless steel. It is available in a threaded mounting configuration and a range of standard hole size options.
Key Product Facts
  • Mounting Configuration: Boss Mount
  • Lohm Rate: 20 to 45 Lohms
  • Micron Rating: 50 to 500 microns
  • Part Diameter: 10 mm
  • Screenable Passageway Diameter: 8.88 mm
View Product
LO-LOHM HI-BAR® Safety Screen Filter, 670 Flange Mount
This laser drilled last chance filter is optimized for flow to produce the lowest pressure drops for the package size.
Key Product Facts
  • Mounting Configuration: Flange Mount
  • Lohm Rate: 6 or 10 Lohms
  • Micron Rating: 50 to 500 microns
  • Part Diameter: 0.670 inches
  • Screenable Passageway Diameter: 0.52 inches
View Product
LO-LOHM HI-BAR® Safety Screen Filter, 495 Flange Mount
This laser drilled last chance filter is optimized for flow to produce the lowest pressure drops for the package size.
Key Product Facts
  • Mounting Configuration: Flange Mount
  • Lohm Rate: 10 to 18 Lohms
  • Micron Rating: 50 to 500 microns
  • Part Diameter: 0.495 inches
  • Screenable Passageway Diameter: 0.40 inches
View Product
LO-LOHM HI-BAR® Safety Screen Filter, 380 Flange Mount
This laser drilled last chance filter is optimized for flow to produce the lowest pressure drops for the package size.
Key Product Facts
  • Mounting Configuration: Flange Mount
  • Lohm Rate: 15 to 25 Lohms
  • Micron Rating: 50 to 500 microns
  • Part Diameter: 0.380 inches
  • Screenable Passageway Diameter: 0.31 inches
View Product
LO-LOHM HI-BAR® Safety Screen Filter, 330 Flange Mount
This laser drilled last chance filter is optimized for flow to produce the lowest pressure drops for the package size.
Key Product Facts
  • Mounting Configuration: Flange Mount
  • Lohm Rate: 25 to 35 Lohms
  • Micron Rating: 50 to 500 microns
  • Part Diameter: 0.330 inches
  • Screenable Passageway Diameter: 0.26 inches
View Product
LO-LOHM HI-BAR® Safety Screen Filter, 230 Flange Mount
This laser drilled last chance filter is optimized for flow to produce the lowest pressure drops for the package size.
Key Product Facts
  • Mounting Configuration: Flange Mount
  • Lohm Rate: 50 to 70 Lohms
  • Micron Rating: 50 to 500 microns
  • Part Diameter: 0.230 inches
  • Screenable Passageway Diameter: 0.19 inches
View Product
LO-LOHM HI-BAR® Safety Screen Filter, 130 Flange Mount
This laser drilled last chance filter is optimized for flow to produce the lowest pressure drops for the package size.
Key Product Facts
  • Mounting Configuration: Flange Mount
  • Lohm Rate: 140 to 180 Lohms
  • Micron Rating: 50 to 500 microns
  • Part Diameter: 0.130 inches
  • Screenable Passageway Diameter: 0.125 inches
View Product
HI-BAR® Safety Screen Filter, 330 Flange Mount, Titanium
This last chance filter is laser drilled from a single piece of titanium and comes with a flange mount.
Key Product Facts
  • Mounting Configuration: Flange Mount
  • Lohm Rate: 40 or 50 Lohms
  • Micron Rating: 100 to 500 microns
  • Part Diameter: 0.330 inches
  • Screenable Passageway Diameter: 0.26 inches
View Product
Strainer, 187 Boss Mount, 304L
This strainer is made of 304L stainless steel, provides course filtration and is available in a low profile, boss mounting configuration.
Key Product Facts
  • Mounting Configuration: Boss Mount
  • Lohm Rate: 0.5 Lohms
  • Micron Rating: 965 or 1575 microns
  • Part Diameter: 1.875 inches
View Product
Strainer, 131 Boss Mount, 304L
This strainer is made of 304L stainless steel, provides course filtration and is available in a low profile, boss mounting configuration.
Key Product Facts
  • Mounting Configuration: Boss Mount
  • Lohm Rate: 1.5 Lohms
  • Micron Rating: 965 or 1575 microns
  • Part Diameter: 1.3125 inches
View Product
Strainer, 162 Boss Mount, 304L
This strainer is made of 304L stainless steel, provides course filtration and is available in a low profile, boss mounting configuration.
Key Product Facts
  • Mounting Configuration: Boss Mount
  • Lohm Rate: 1 Lohms
  • Micron Rating: 965 or 1575 microns
  • Part Diameter: 1.625 inches
View Product
Strainer, 875 Boss Mount, 304L
This strainer is made of 304L stainless steel, provides course filtration and is available in a low profile, boss mounting configuration.
Key Product Facts
  • Mounting Configuration: Boss Mount
  • Lohm Rate: 3.5 Lohms
  • Micron Rating: 965 or 1575 microns
  • Part Diameter: 0.875 inches
View Product
Strainer, 750 Boss Mount, 304L
This strainer is made of 304L stainless steel, provides course filtration and is available in a low profile, boss mounting configuration.
Key Product Facts
  • Mounting Configuration: Boss Mount
  • Lohm Rate: 6 Lohms
  • Micron Rating: 965 or 1575 microns
  • Part Diameter: 0.75 inches
View Product
Series 10 and 20 Safety Screens, 656 Flange Mount, 316L
This wire mesh last chance filter is constructed of 316L stainless steel and offers hole sizes of 10 or 20 μm.
Key Product Facts
  • Mounting Configuration: Flange Mount
  • Lohm Rate: 13 or 25 Lohms
  • Micron Rating: 10 or 20 microns
  • Part Diameter: 0.656 inches
  • Screenable Passageway Diameter: 0.595 inches
View Product
Series 10 and 20 Safety Screen Filters, 500 Flange Mount, 316L
This wire mesh last chance filter is constructed of 316L stainless steel and offers hole sizes of 10 or 20 μm.
Key Product Facts
  • Mounting Configuration: Flange Mount
  • Lohm Rate: 30 or 50 Lohms
  • Micron Rating: 10 or 20 microns
  • Part Diameter: 0.500 inches
  • Screenable Passageway Diameter: 0.445 inches
View Product
Series 10 and 20 Safety Screen Filters, 375 Flange Mount, 316L
This wire mesh last chance filter is constructed of 316L stainless steel and offers hole sizes of 10 or 20 μm.
Key Product Facts
  • Mounting Configuration: Flange Mount
  • Lohm Rate: 50 or 95 Lohms
  • Micron Rating: 10 or 20 microns
  • Part Diameter: 0.375 inches
  • Screenable Passageway Diameter: 0.333 inches
View Product
Series 20 Safety Screen Filter, 130 Flange Mount, 316L
This wire mesh last chance filter is constructed of 316L stainless steel and features a hole size of 20 μm.
Key Product Facts
  • Mounting Configuration: Flange Mount
  • Lohm Rate: 450 Lohms
  • Micron Rating: 20 microns
  • Part Diameter: 0.130 inches
  • Screenable Passageway Diameter: 0.126 inches
View Product
Series 10 and 20 Safety Screen Filters, 312 Flange Mount, 316L
This wire mesh last chance filter is constructed of 316L stainless steel and offers hole sizes of 10 or 20 μm.
Key Product Facts
  • Mounting Configuration: Flange Mount
  • Lohm Rate: 80 or 100 Lohms
  • Micron Rating: 10 or 20 microns
  • Part Diameter: 0.312 inches
  • Screenable Passageway Diameter: 0.312 inches
View Product
Series 10 and 20 Safety Screen Filters, 255 Flange Mount, 316L
This wire mesh last chance filter is constructed of 316L stainless steel and offers hole sizes of 10 or 20 μm.
Key Product Facts
  • Mounting Configuration: Flange Mount
  • Lohm Rate: 120 or 180 Lohms
  • Micron Rating: 10 or 20 microns
  • Part Diameter: 0.255 inches
  • Screenable Passageway Diameter: 0.223 inches
View Product
Series 20 Safety Screen Filter, 170 Flange Mount, 316L
This wire mesh last chance filter is constructed of 316L stainless steel and features a hole size of 20 μm.
Key Product Facts
  • Mounting Configuration: Flange Mount
  • Lohm Rate: 450 Lohms
  • Micron Rating: 20 microns
  • Part Diameter: 0.170 inches
  • Screenable Passageway Diameter: 0.14 inches
View Product

No Results

No results match your search

Clear all Filters

Get In Touch

Not Finding What You’re Looking For? We’re Here to Help.

If you’re having trouble finding what you need, our team is ready to help you. We have an extensive resource library and a team of degreed engineers who have decades of experience solving complex fluid control problems.